Keith Breazeal Video Productions

The common structure to all of the California UFO Drone photos is the center circular structure with the "Staves" protruding upward. There are some interesting features protruding from the center of the hub that I will call "Loops". There are seventeen of these "Loops" on this particular "Drone". Earlier photos had sixteen of them, an interesting fact. These "Loops" appear to be directly related to the "Staves" because they are directly in line with and have the same number count.

Caution should be used when analyzing photos like this recent "boomerang" UFO. Note the motion distortions- especially the separate lower ring. Inset photo "A" is a reference showing no distortions due to motion or speed. Inset photo "B" represents extreme distortions due to the shutter speed be lower than "A". Both photos were shot using a fill flash. Inset photo "C" is an enlargement from "B". The front tire and rim in inset "C" illustrates interactions between shutter speed, forward motion, and rotational motion.

The blue shadow is not typical of chromatic aberation since the red component is missing. The inset shows the blue shadow varies in direction from the dominate direction- not typical if it was from a lens aberation. It's also important to notice the inset area in in a shadowed area, thus greatly reducing the possibility of aberations there.

SEE THE LATEST UPDATE: http://www.kbvp.com/photo/california-ufo-drone-propulsion-analysis

The sightings of this UFO "Drone" in parts of California have piqued the interest of many people.

I picked this photo "A" due to what at first appeared a dust spot "B". I cropped around the spot and increased the size and pixels to gain resolution. I then applied more contrast and sharpening. The result is what appears to be another object "C". There is no indication this photo is faked. *note* I added further analysis and an enhanced photo of this anomaly. see: analysis of inset figure "B" anomaly (posted 14 July, 2007)

Inset "D" shows a close-up as the "drone" passes overhead. There are several curved components that rise vertically from the circular hub. The enlargements "E" and "F" show the detail of these components. These are very thin and quite symmetrical despite the objects motion.

Inset "G" is from a separate observation over 200 miles to the west. Notice the "drone" has additional hardware added. These are two separate but similar attachments with three spikes protruding from each.